!
!

FiberRoad Splice Tray System

The FibeRoad system can be used in Fiber Boxes, Fiber Distribution Hubs - FDHs or Data Cabinets. It supports all types of fiber optic networks and helps create all configurations of fiber distribution and direct termination of connectors. It is ideal for GPON.

Download data PDF

  • Possibility of cascade solution for saving place
  • Compatible to trays KM 4 (24 splices), KM 5 (12 SC), KM 6 mini (24 splices)
  • Possibility to mix different trays in one box
  • Modular capacity increasing by segments 
  • Patching solution in the stacking system 
  • Possibility of placing the splitters away from trays
  • Space for the placement of unused fibers
  • Compatible to fibers in secondary sheath (0,9 mm)
!

FiberRoad BASE KM P 495529

Main Base unit, only square lower plate, picture shows base with 4 Holders which can be mounted flat or at 45 deg depending of the tray configuration.

FiberRoad HOLDER KM 495530

Tray Supports, 1 required for every tray

FiberRoad SUPPORT STOCK 495785

Used to hold trays at 45 deg if main base is put flat. 2 required.

KM4 SPLICE TRAY 85AV.04/0000

  •  Placement of up to 24 splices 
  • Without the need to measure the fibers before splicing 
  • Placement the splices away from the fibers 
  • Possibility to unwind incoming directions separately 
  • Possibility to place a splitter 
  • Possibility of placing fibers in 0.9 mm sheath (pigtail) 
  • Possibility of ribbon fibers 
  • Hingeable and stackable on mandrel

KM4 SPLICE TRAY LID 85AV.05/0000

KM5 Tray unit.

  • Placement of up to 24 splices 
  • Placement of 12 SC simplex or 12 LC duplex adapters
  •  Place for pigtails and fibers reserves in the lower part
  •   Screw-free/Fast system of adapter mounting
  •  Patchcords cover
  •  Channels for patchcord routing
  •  Possibility to place a splitter 
  •  Possibility of placing fibers in 0.9 mm sheath (pigtail) 
  •  Possibility of ribbon fibers 
  •  Hingeable and stackable with help of connecting pieces
Note:- No adaptors supplied with this unit, order from Connectors & Adaptors in menu.

MDB FA 144/192/288S

Optical distribution box MDB FA 144/192/288S is designed for the placement of 144/192/288 optical splices indoors and outdoor. The distribution box can be extended by a pole holder. A very suitable solution for spliced GPON networks
  • Maximum capacity of 144/192/288 splices
  • Cable rings
  • Placement of a large slack inside the cable management
  • Removable splicing part
  • FibeRoad system
  • Modular capacity increase
  • Possibility of placing PLC splitters inside the management (outside the trays)
  • Possibility KM 4 trays or KM 6 trays for 24 splices
  • Possibility of using ribbon fibers

 Download Data sheet

MDB FA 24/48

Optical distribution box MDB FA 24/48, 48/96, 72/144 is designed for the termination of 24/48/72 fibers to SC connectors or 48/96/144 fibers to LC connectors indoors and outdoors. The distribution box can be enhanced by the pole holder and it can store large cable/patchcords reserves.
  • Maximum capacity 24/48/72 SC or  48/96/144 LC
  • Ranging rings
  • Possibility of storing large cable/patchcord reserves inside the distribution box
  • Removable splicing/patching part
  • FibeRoad system
  • Possibility of modular increasing of the capacity 
  • Possibility of placing PLC splittera in the management section (outside the tray)
  • Possibility to combine trays KM 4, KM 5, KM 6
  • Trays KM 4 and KM 6 for 24 splices
  • Tray KM 5 for 12 SC or 24 LC connectors
  • Hinging KM 5 tray for a better handling
  • Possibility of ribbon fibers

Download Data sheet