Self-supporting fibre optic cable

 AirFlow Fibre is a universal (for outdoor and indoor use), round and self-supporting cable for FTTx systems, strengthened by aramid fibres (supporting element in aerial installations). The light construction with small diameter (3.5 mm), high flexibility and high tensile strength enable installers to build suspended lines with spans up to 80 m.
The cable has been specially designed to ensure very good protection of fibres and ease of installation. The G.657A2 fibres allow for very small bending diameter (even 7.5 mm). The cable is intended for aerial installations and for use in primary and secondary telecommunication ducts. It can be deployed using pneumatic or mechanical methods.
The cable (1000 m) is wound on a rotary spool located in a cardboard box, from which it can be easily pulled out.

!

Self-supporting Fibre Aerial Cable 4 core

AirFlow is a universal (outdoor and indoor use), round and self-supporting fibre cable for FTTx systems, strengthened by aramid fibre (supporting element in aerial installations). The light construction with small diameter (3.5.mm), high flexibility and high tensile strength enables installers to build suspended lines with spans up to 80 m.

The cable has been specially designed to ensure very good protection of fibres and ease of installation. The G.657A2 fibre allows for very small bending diameter (down to 7.5mm). The cable is intended for aerial installations and for use in primary and secondary ducts. It can be deployed using pneumatic or mechanical methods.

The cable (1000 m) is wound on a rotary spool located in a cardboard box, from which it can be easily pulled out. The price is given for 1 meter.

Self-supporting Aerial Fibre Cable, 4x9/125um Singlemode, ITU-T G.657A2, unto 80 Meter Span.

  • Cable Jacket PE
  • Outer diameter 3.5mm
  • Max tensile strength (installation) 800N
  • Operating Temp range -20C - +60C 
  • Sold by Reel fibre length 1000m

Anchoring Clamp 3 - 6mm Cable

Fibre Drop clamp, allows the suspension of a cable including a short reserve. The entire clamp is coated with UV protective layer. The clamp is designed for fibre cables with diameter between 3 and 6mm.